The SD card facilitates the performance of the cell phone without having to buy a new one, also allows the user to easily save information. You can also use it in other devices such as digital cameras, taking into account that there are different types of cards.
It should also be noted that putting a card in the device is an operation that people commonly perform without knowing that in one way or another they can cause damage to the phone. For this reason, it is recommended to go through the process of formatting the card or inserting a completely new card for your device.
It should be mentioned that this procedure can be performed with any device, but above all this process can be done when your device does not have much internal storage capacity. So you can buy a 32, 64 or more GB card to perform this operation.
Steps to connect an SD card to my device
Next we will explain how to insert an SD card into the mobile device, since storage is one of the main problems of phones. So first of all to be able to insert the memory or SD card you must have the device in hand and you have to turn it off . Remember that it is very important to work with the device like this to avoid any type of damage.
Then you must take the SD card and then you must look on the sides of the phone for the hole where it should be inserted. Once you locate it and open it, you can place the card in the correct way and then you can insert it into the phone.
As soon as you have completed these steps you can turn on the mobile device again and you will find a notification that the SD card was entered. Then if you wish, you can enter “configuration” and in this section you must look for the “storage” section.
When the new window opens, you will be able to select « SD card», then you will be able to see a new menu where you have to select the three points found in the upper right part of the screen. It will display a submenu where you must select ” storage options“.
Use SD memory as internal storage
This option will allow you to observe three additional options which are: format, format as internal storage and finally eject. So in this case I must select option number two, click on it and you will automatically display a message which asks if you want to format the SD card?
So at the bottom select ” format SD card ” and then you will see the process of it in a bar. After the card is formatted, it will automatically remain as internal storage. This indicates that any download you make with your device or any movement will be saved on the SD card.
Once the formatting process is complete, you will be asked a question which is: transfer the content to the SD card?. Followed by several indications or warnings in case you approve the transfer which are: do not remove the SD card, some apps will not work and finally keep the phone charged.
It is recommended that at the bottom you select the option “transfer content later”, and finally the option “ready” should be selected. In this way the process of inserting and activating the SD card will be completed.
Then you can see in the settings that the internal storage is shared with the SD card. Which is a good option for Android phones. Emphasizing that the compartment activation process cannot be performed on the iPhone.
This is the correct way to put a micro SD memory card as internal storage. In general, it is always recommended that you do not insert cards with information from another device or that it belongs to another device in your device, as it could cause damage to the new equipment.
Finally, we hope that this article has helped you. However, we would like to hear your opinion. Have you been able to connect an SD card to your cell phone? Do you know of another method to connect an SD card? Leave us your answers in the comments.