Fast charging is a tool that is responsible for reducing charging times on your smartphone with operating system Android. Previously, mobile devices with batteries of 4 thousand milliamps (mAh) or higher values took more than an hour to get from 0% to 100%, however, after the arrival of the aforementioned technology, that time was reduced by half and even less, suddenly about 20 or 30 minutes, of course the power of the charger you have purchased also influences.
To understand the topic we will answer the following question: “What are charge cycles?” Mobile battery life is measured by charge cyclessince this represents the number of times the battery is charged from 0% to 100%, it is not bad to charge your device several times a day, as long as the sum of all does not reach or exceed 100%, without However, users tend to charge their cell phone to 100% two or more times a day with fast charging, thus depleting battery cycles.
LOOK: Ultimate Guide to Block Google Chrome Ads on Android
As you remember, current batteries have a useful life of 500 charge cycles (approximate value), which means that you can charge from 0% to 100% 500 times. We recommend using fast charging on certain occasions, for example: when you’re in a hurry and need maximum power in a short time.
How to disable fast charging on your Android smartphone
- First, enter the “Settings” of your phone Androidyou locate it with the icon of a cogwheel or gear.
- Now, click on the section that says: “Battery and device care”, the name may vary slightly depending on the brand and model of the cell phone.
- The next step is to click on the section called “Battery”, which is located under the “Optimize” button.
- Scroll down and tap the “More battery settings” option.
- Finally, turn off the “Fast Charge” switch.
- Done, that would be it. When you reconnect the smartphone, the warning will no longer appear “Fast charge. There are (x minutes) left to complete”.
Know the solution when the touch screen of your Android mobile does not work
- restart the cell phone: surely there is a process that is freezing the touch screen of the device, so when you restart your cell phone all the processes will also be canceled and the RAM memory returns to 0 GB of use. How do you restart your phone if the touch doesn’t work? Simple, simultaneously press the physical power buttons, volume minus and plus for about 5 or 10 seconds, when it restarts, release them because otherwise you will access the “Root” mode. If you’re prompted for a security pattern before shutting down or rebooting, there’s no choice but to wait for the battery to die.
- Access safe mode: just like computers or laptops, cell phones and tablets can also be infected by any type of virus. This would cause your device to have bugs like frozen screen. We recommend you access “safe mode”, a tool that after enabling it, your smartphone will automatically restart to show you only the pre-installed applications of Androidif the touch screen works without problems, it is probably a virus.
- The touch does not work, how do I enter safe mode? It’s a good question, but it has a solution. Restart your cell phone several times with the method that we mentioned at the beginning, so you will force the system to access the aforementioned mode.
- other solutions: clean the touch screen with a flannel, dirt prevents the cell phone from recognizing your gestures; remove the screen protector or change it, sometimes this device cracks or wears out and prevents you from browsing normally; reset the cell phone, it is worth mentioning that after doing so you will lose all your data, be they photos, videos, documents, etc.; take it to a technical service.