When we have an electronic device, we are not exempt from the errors that can happen with its use, since it, over time, suffers from some setbacks, most of which can be repaired.
One of the most representative and visible errors that we can find in some computers is the “Error Loading the Operating System of your PC” which usually appears once a new Windows XP system has been installed and which begins with an action of I relapse into our system.
The common thing is that while the machine begins its startup process, the BIOS and CMOS of the computer begin to check the hardware of said system and also that of the operating system.
The usual thing is that once something starts to go wrong, the BIOS and CMOS will not carry out the normal startup process of your operating system, since for this reason it is not possible to access the Windows desktop.
However, other versions of Windows, such as Windows Vista or even Windows 7, will not have the same warning system and therefore, this message may not be shown to you.
If the initial problem you have with your PC is the fact of not being able to load the Windows Vista or Windows 7 system without this message appearing, it will only remain for you to start trying the “Initial Repair” option which is carried out with the Windows Installation Disc .
What is the reason for this error to appear?
There are three main reasons, for which this error can appear on your computer, which are important that you take into account if you want to carry out the correct repair of it:
- There is a possibility that the BIOS inside the motherboard is not compatible with the size or, failing that, with the configuration of the unit that has the hard disk.
- Check that the hard drive settings are adapted to CMOS.
- If you have made any kind of partitions inside the hard disk, it is possible that there is an error inside it, which makes it impossible to install it correctly.
Steps to fix the problem with the error?
Start by setting the BIOS and CMOS appropriately
One of the main reasons for this problem are causes 1 and 2 that we have placed at the beginning of the post, for this reason, one of the most logical solutions is to perform a complete BIOS update on your motherboard.
All this by carrying out this action manually on your computer or, failing that, doing it through the manufacturer’s website, where you can find small tutorials to complete this task.
Likewise, you must go to the CMOS configuration, in order to make sure that your hard disk has been detected correctly and that at the same time, the ” Access Mode ” is changed to Large or LBA in order to add a support for the large capacity of the hard disk.
Starts to fix problems arising from hard drive partition
When a disk partition is made, the most common is that this error derives from an improperly made partition inside the hard disk, since from this, a great load of errors will come from within the operating system load.
You could correct all those errors that arise from this load of the operating system with the PowerSuite Golden application, which offers its users a graphical interface, which is easy to access and will help you with all this problem.
It has some basic tutorials, which are ideal to carry out the task of repair and recovery of the system, so you will not feel lost at any time.