The article has been checked for accuracy (content includes links to reputable media sites, academic research institutions, and occasionally medical studies). All content on our website has been reviewed, however, if you believe our content is inaccurate, out of date or otherwise questionable, you may contact us to make the necessary corrections.
5 minutes
Even if you don’t have experience painting tiles, you can do it if you put your mind to it. These are the 7 mistakes you should avoid.
Renovating the house is something that most people like, but sometimes they do not have the budget to do it. For this reason, we have to get down to work, even in more complex tasks such as painting the tiles in the home. It sounds simple, although there are those who make mistakes.
If you are looking to give a fresh air to the tiles of your kitchen or bathroom, with a finish professional, you should know that there are professional enamels, which also add shine. But this is not all. To achieve a quality result, the technique you apply is also important.
The mistakes you should avoid when painting the tiles of your house
An inexperienced person can successfully paint the tiles of his home, only if he does not make the typical mistakes that are almost always irreversible. We list them for you.
1. Do not use special paint
If you apply satin, rubber, or even oil paint, the tiles will most likely end up ruined to the point of looking worse than they were to begin with.
Paint peeling and stains will appear in no time, especially if the tiles are from the bathroom or kitchen of your home. To avoid these errors you must acquire a special paint for these coatings. Go to a store and ask for them.
In this way, the paint will be able to adhere to the tiles optimally, regardless of whether it is a humid place such as the bathroom. In addition, these products are characterized by repelling water, grease and dust.
2. Paint without the help of a brush or trowel
The roller speeds up the work of painting. There’s no doubt. But you will need the help of a brush to make good finishesas the roller can leave unpainted areas along the joints.
For this reason, it is recommended to start painting with a brush or brush, paying special attention to the joints and pores. You finish with the roller throughout the area to be treated in a single direction and neatly.
3. The roller you chose is unsuitable
The type of roller will depend on the size and texture of the tiles. If they are large, keep in mind that you will need enough paint to cover them. Therefore, the use of foam rollers is recommended.
Instead, wool rollers are for those painters who do not have much experiencesince they absorb more of the substance and make it easier to measure the amount.
4. Not cleaning the surface before painting
Perhaps because we want to see the transformation quickly or because we are lazy, but the truth is that we usually skip cleaning the surface to be treated.
Keep in mind that Dirt, grease, and soap scum clinging to the tiles make for an uneven surface.. This being the case, the paint is not going to adhere optimally and, on the other hand, it can be lumpy. Cleaning the tiles is a step that you should not skip.
5. Start painting without delimiting the borders
When you finish cleaning the ceramic, use a cloth to dry it. At that point it is time to delimit the work area, with the help of a plastic sheet to protect the floor and a masking tape for the rest of the edges.
6. Repaint the tiles without sanding
If you’ve already painted the tiles and are looking to repaint them, you’ll need to sand the surface or you’ll risk clumping and smearing. Remember that the previous paint may be in poor condition. After you clean the tiles, proceed to sand them with the help of a hand sandpaper.
In the same way, if you consider it necessary, use a electric sander to remove a bit of the tile’s own shine. Thus, the products to be applied can be fixed without running over time.
7. Skipping tile primer
With the tiles already clean and sanded, if it is the case, you must apply a layer of fixative. You can buy this product both in physical stores and on-line. It is necessary so that the special paint has a better grip.
The technique to use is to use a brush to start, applying fixative through the joints. Then get the small roller to cover the entire area.
Painting the house tiles yourself is possible if you avoid mistakes
What guarantees success when painting home tiles are the appropriate materials and follow the manufacturer’s instructions. Therefore, in addition to being guided by our recommendations, you must guarantee sufficient drying time between the sealant and the paint.
Likewise, the suggestion is an ambient temperature between 15 and 25 degrees Celsius, so if you have heating or a boiler, you should turn it off until you finish painting the ceramic. Do not forget to have a special product or thinner on hand to clean the brushes when you finish.
You might be interested…