It should be noted that computers are the most used technological devices today and they contain a series of components. Which must work properly so that the equipment provides the best functions, you always have to be aware of those little details.
At the same time, it is important to understand that extra tools can be connected so that the computer works at its best. In this case, connecting an extra fan helps the temperature flow to be as required by the equipment.
Discover how to connect an extra fan to your PC
First of all, to be able to connect an extra fan, you must consider taking a series of previous steps to achieve it. Initially, you will have to buy a fan, take a good look at your cabinet space to be able to install it there.
Choose a moderately sized fan, although large ones are the most recommended. In turn, consider evaluating the different brands and choosing the one of your choice.
Next, you must make sure to open the cabinet carefully but remember that you must disconnect the computer to avoid risks, this is important to take into account. You must then open the side panel to get inside the cabinet.
It is also recommended that you locate each of the vents to be able to install the extra fan since the cabinet has several connections.
Together, you must locate the connectors on the motherboard, but keep in mind that they may be scattered or there may only be a pair of connectors. Also after locating them you will have to configure the fans.
Also, you should be aware of checking the fan, since they move in only one direction. Therefore, it should be considered that it moves in the direction indicated by them; since they have a glued label where you can see where they should turn. In this way, you will be aware of how to connect.
You should also consider installing the fan to create a wind tunnel. It is also recommended to install more exhaust fans in the cabinet than injection fans. These can be connected at the back for better performance.
Steps to easily connect an extra fan
Likewise, if you are going to connect it from the front, you should consider that it is an injection fan so that it can suck in the air. You can also connect it at the top and in this way you can extract the air since the heat is concentrated in the upper part of the cabinet.
After you have viewed the vent connector you prefer, you can proceed to install it. Then you can fix the fan by means of the four screws that must be tightened, in this way you will prevent it from vibrating, but you must make sure to tighten them well.
In addition, you can use some strips of tape to help you keep the fan fixed, in case there are problems when tightening the screws. Then you can remove the tape.
Visualize the cables
On the other hand, it is necessary to visualize that no cables get in the way of the fan blades. For this reason, it is recommended that you fix the cables with cable ties for greater security. After you have completed these steps you will be able to connect the fan to the motherboard through its power connectors.
Remember that if you connect the extra fan to the power supply, it will always work at maximum speed, since you cannot change the speed from the BIOS.
Finally, you can close the cabinet so that you can later test the fan. It is recommended to always test the fan with the cabinet closed since if you leave it open you will not be able to notice the cooling system.
You can also track the fan through the BIOS if the same connectors on the motherboard. You can also check the speed through the SpeedFan program in Windows, remember that if the connection was made at the power source, you will not be able to check its speed.
Finally, we hope this article has helped you. However, we would like to hear your opinion. Do you know of another method to install or connect an extra fan to the PC? Leave us your answer in the comments.